Product Information
The Flexitec 2020 Hardener comes in powder form and is added to Flexitec 2020 Resin and Primer to begin the curing process. Hardener is added in ratio between 2 – 4%, This means between 2 to 4 scoops of powder hardener per litre of product.
Features
Simple and quick “scoops per litre” addition rate system
No need to decant before adding to the resin
Safer to handle and transport
Advisory
Primer Hardener requirements
Flexitec 2020 Primer requires powder hardener at a minimum of 2% and a maximum of 4% depending on temperature. To ensure that the curing process is not impeded:
Never use less than 2% even in hot conditions
Never use more than 4% even in cold conditions
Back to Top