ARBOFLEX PU UV PROTECT is a single component aliphatic resin for treatment and protection against UV rays.
It forms a flexible, seamless layer in satin finish, with excellent adhesion and mechanical properties.
It forms a resistance to abrasion and stress, weathering, temperature variations, UV radiation.
- It is a satin finish, aliphatic, single component resin.
- Tack free time: 5 minutes; open to use: 3 hours.
- It forms an easy to clean and maintain, continuous coating.
- ARBOFLEX PU UV PROTECT should be applied in dry conditions.
- ARBOFLEX PU UV PROTECT can be applied on a variety of surfaces: concrete, cement, ceramics and ARBOFLEX PU membranes.
- Apply on dry, firm substrates, with a surface temperature of between 3 ºC above the dew point, an ambient temperature of at least 10 ºC.
- ARBOFLEX PU UV PROTECT must be applied in thin layers, with a roller or brush.
- Do not apply on swimming pools or in areas submerged in water. For further information, please contact our technical department.
- The yield of ARBOFLEX PU UV PROTECT varies depending on the layers applied, the type of substrate or the final use. It is applied in thin layers, consumption is approximately 200 g/m2/coat.
- Expires after 12 months, at temperatures between 5° C and 35°C, provided it is stored in a dry place. Once opened use immediately.
- UV protect is roller applied onto the cured Arboflex PU at approximately 200ml per m2