Product Information
Sure Edge Gutter Drip Trim 2.5m
The Gutter drip trim simplifies your roof edge and is used to secure the membrane where water runs off the roof. The drip edge is a two part trim that clamps the membrane into place and creates a step into the gutter.
Ideal for Professional & DIY roofers alike, just cut to length. Don’t forget to buy your corners.
Height: 75 mm
Length: 2.5 metres
Qty in Pack: 1
(Stainless Pins and Jointing Clips all included)
Product Content
Rubber Roofing Edge Trims
To complement and support your consideration of our our Sure Edge Gutter Drip Trim – RKD provides a range of EPDM – Rubber Roofing Edge Trims.
These include
- Sure Edge
- Plasticised Metal Trims
Sure Edge
NOTE – These trims are 2.5m in length
The Gutter drip trim simplifies your roof edge and is used to secure the membrane where water runs off the roof. The drip edge is a two part trim that clamps the membrane into place and creates a step into the gutter.
Ideal for Professional & DIY roofers alike, just cut to length. Don’t forget to buy your corners.
Height: 75 mm
Length: 2.5 metres
(Stainless Pins and Jointing Clips all included)
The Sure Edge Kerb Trim is used to secure the membrane on the fascia edge of the roof where a gutter drip is not present. The kerb trims creates an upstand seal on the roof edge and removes the need for a timber upstand.
Ideal for Professional & DIY roofers alike, just cut to length. Don’t forget to buy your corners.
Height: 100 mm
Length: 2.5 metres
(Stainless Pins and Jointing Clips all included)
Sure Edge Kerb Corner – External
Used For: Used to finish corner of the roof where two trims meet on an External Corner
Height: 100 mm
Sure Edge Kerb Corner – Internal
Used For: Used to finish corner of the roof where two trims meet on an Internal Corner
Height: 100 mm
Sure Edge Drip Corner – External
Used For: Used to finish corner of the roof where two Drip trims meet on an External Corner
Height: 100 mm
Sure Edge Drip Corner – Internal
Used For: Used to finish corner of the roof where two Drip trims meet on an External Corner
Height: 100 mm
Plasticised Metal Edge trims
NOTE – These trims are 3m in length
Colour: Black (Plastisol coated on outside only)
Used For: Metal Edge Trim for rubber roofing used to create a professional finish to roof edges where you wish the water to be diverted back onto the roof i.e. (Kerb Edge)
Note:To use the trim as a kerb edge it is necessary to create a small up-stand by installing a tanalised wood batten onto the roof deck prior to installing the EPDM membrane.
Drop Heights: 75mm / 100 mm / 150 mm
Top Edge: 40 mm
Drip Tang: 10 mm
(Includes 35mm self sealing Hex Fasteners)
Used in conjunction with Lap Sealant/mastic to create a waterproof junction on up-stands or wall junctions.
Can also be used as Gutter Drip Trim when installing Metal Edge Trims (Can be top or side fixed with screws included)
When using as a wall up-stand trim the membrane is dressed into the wall or up-stand using the Wall Trim.
Requires use of Angle Grinder to create channel in brickwork or render
Height: 90 mm
Width: 25 mm / 40mm
Colour: Black (Plastisol coated on outside only)
(Includes 35mm self sealing Hex Fasteners)
The sealant is inserted along the top of the Wall Trim into the pre-ground slot in the wall or up-stand.
The shed roof edge trim can be used in place of a piece of timber to secure the rubber membrane on the perimeter of the roof. Used to professionally finish off the edge of the shed roof. The trim will ensure that the roofing membrane is secure and free from wind up lift
Cutting: Can be cut with hacksaw or tin snips
Trim Dimensions: 25mm x 50mm x 3.0 Metres
(Includes 35mm self sealing Hex Fasteners)
Back to Top