In Stock

Tool Pack – Small – 1man

Specially tailored tool pack for smaller roofing projects up to 40m2


£45.00 ex VAT
£54.00 incl VAT

Product Information

Tool Pack – Small – 1 man

Tool Pack – Small – 1man  –

Specially tailored tool pack for roofing and pond lining.

Small tool pack (TP5) ideal for roofs and ponds up to 30m².

Kit contents

1x box (50 pairs) surgical gloves
1x 140×21 paddle roller
1x 75×21 paddle roller
4x 150mm deep pile resin roller refill
2x 150mm short pile topcoating roller refill
1x 150mm roller arm
2x 75mm Brush
3x 5 litre bucket
1x graduated measuring cup
2.5 litre acetone
1x telescopic extension arm
1x 250ml liquid hand cleaner

Product Content

Fibreglass Roofing Installation Tools

To complement and support your interest in our Tool Pack – Small – 1man – RKD provides an extensive range of Fibreglass Roofing installation tools. These are of high quality and fit for purpose to enable ease of installation.

RKD provide the option to add a tool pack on our fibreglass roofing kit products,  a one-stop for installers to have the right tools for the job. 

Fibreglass Roofing Installation Tool Packs

Our tool packs are specially tailored for Fibreglass Roofing containing all you need to install effectively.

Basic Tool Pack for roofs up to 5 m2 

Small Tool Pack for roofs up to 30 m2  

Large Tool Pack for roofs up to 100m2

PPE (protection)

Protection is a vital consideration when installing fibreglass roofing as this includes hazardous materials. Protect your eyes, hands and breathing.

Latex Gloves

Our Latex Gloves Box (50pr) are dextrous, sensitive and comfortable. Made from high quality natural latex they have a rolled cuff providing additional strength with textured fingertips for improved grip. For ease of wearing they are lightly powdered.

Safety Goggles

As with hands so with eyes – protect them at all times – Soft PVC frame with impact-resistant polycarbonate lens. Lightweight and flexible. Wide vision with direct ventilation. Conforms to EN166

Particle Dust Masks

Disposable particle dust masks to alleviate irritation by non-toxic particles. Single use

Catalyst addition measurement tools 

By far the most worrying element, especially for DIY installers, in Fibre Glass Roofing is the addition of catalyst (hardener) to roofing resin and roofing topcoat. Catalyst enables full curing (hardening) in a viable time scale and is impacted by both ambient and deck temperatures and of course the seasons. Getting this right is most important for success so accurate measurement when taking everything into account is a must. 

Catalyst Dispensers – to use you simply take off the dispenser lid, and fill with Catalyst. Easy to use, you squeeze the bottle, until your dispenser reaches the required amount you need then simply mix very thoroughly to your Resin or Topcoat.

Large – 10 -80 cc’s  –  

Small – 1 -15 cc’s  – 

Syringe 50ml – 

Graduated Mixing Bucket – Seeing is believing 

Another very visual alternative to dispensers, a durable polypropylene bucket, ideal for mixing resins and cleaning tools in acetone. Translucent printing shows quantity of resin in litres/kg with a scale to show how much catalyst to add. 

Diameter = 290mm : Height = 260mm

Mixing Cups – Another alternative to dispensers for measuring catalyst addition.

1180mlStrong & flexible Polypropylene – Graduations; 50ml – Self Releasing – Can be re-used

1400mlStrong & flexible Polypropylene – Graduations; ml – 2:1, 3:1, 4:1 & 5:1 – Self Releasing – Can be reused

Mixing SticksLengths 280mm and 300mm.

Mixing catalyst into resin thoroughly and evenly is just as vital as getting the measurements correct. Our Lightweight reusable plastic mixing sticks are fully resin and solvent proof.

Here is a chart to assist catalyst addition –

Rollers and Sleeves

Paddle Rollers

This tool is integral to your Fibreglass GRP Roofing Installation success

Paddle rollers are the most popular consolidation rollers being particularly effective with chopped strand mat (CSM). 

What is consolidation? When you use the paddle roller you are simply combining the matting within the resin, strengthening the resin base layer – when fully consolidated, this layer will go translucent.

You can consolidate several layers at a time if required. The roller extracts air and increases the strength of laminates and their horizontal flutes allow extra pressure to be applied without shearing glass fibre strands.

Large – 225mm x 21 mm – 

Medium – 140mm x 21mm – 

Small – 75mm x 21mm

A roller is a roller right? Nope! Our rollers aren’t what you get at the local DIY store – they are designed for Roofing Resins and Roofing Topcoats.

Roller arms

Our Roller frames/arms are made of heavy duty steel, Push fit and Re-useable when cleaned with acetone after use.

Small – 100mm – 

Medium 150mm – 

Large – 180mm – 

Roller sleeves – Resin

Small – 100mm :

Medium 150mm :

Large – 180mm.

Top quality 18mm polyamide pile roller sleeve refills – These sleeves are super bonded to the core making them ideal for resin laminating and topcoating. The design of the roller bearing and the grip sockets ensures flawless operation.

Roller Sleeves – Topcoat

Small – 100mm :

Medium 150mm :

Large – 180mm.

Top quality 4mm polyamide pile refill (Thinner than resin sleeves) enabling smooth installation of the naturally much thinner finishing topcoat layer. Super bonded to its core making it ideal for topcoating. As with our Resin Sleeves, these also bear the roller bearing and the grip socket design for flawless operation.

Extension Pole – 840mm to 1400mm

Fibreglass roofing is by its nature a manual exercise involving repetitive application with rollers. Save strain and bending of your back with quality steel telescopic extension handle – Fits all roller frames and consolidation rollers and has a detachable cap to allow fitment of screw thread or push on roller handles.

Buckets

Roofing Kits Direct recommend mixing of catalyst with resin in manageable quantities – 5 kg is ideal. We Stock durable polypropylene buckets – Ideal for mixing resins, topcoats and cleaning tools in acetone. 

Resin and topcoat will cure faster within a bucket than on the deck itself so the manageable % kg volume helps to avoid wastage. Use two buckets one when laying up and the other for a colleague to mix the next batch. Then exchange and press on.

When your bucket contents have been used the thin residue in the bucket will cure v quickly – just flex the bucket and the residue will crack out

5.6 litre – Diameter = 190mm : Height = 195mm

11 litre – Diameter = 260mm : Height = 225mm

10 litre – Rectangular – L = 355mm W = 228mm H = 188mm

Brushes

Our Solvent resistant brushes are ideal for detail work where a roller can’t reach. In base coat installation they are used in stippling fashion where consolidation is required in tight angles and corners. They won’t break down when used with Resin Gel/Topcoat and can be cleaned with Acetone and re-used – 12mm  :  25mm  :  50mm  :  75mm